Frequently Asked Question
Using Frame Grabber with Halcon application
Last Updated 3 years ago
The Halcon application uses GenICamTL adaptor to connect and control the Frame Grabber.
The Frame Grabber should be automatically detected by Halcon's Image Acquisition tool, under the "GenICamTL" devices, as long as no other application (e.g Vision Point) is using the same Grabber.
1. Frame Grabber device detection by Halcon's Image Acquisition tool:
2. Camera detection and script generation:
More information and examples on official GenICamTL support in Halcon application can be found on:
https://www.mvtec.com/products/interfaces/documentation/view/1307-standard-13-mvtecdoc-genicamtl
The Frame Grabber should be automatically detected by Halcon's Image Acquisition tool, under the "GenICamTL" devices, as long as no other application (e.g Vision Point) is using the same Grabber.
1. Frame Grabber device detection by Halcon's Image Acquisition tool:
2. Camera detection and script generation:
More information and examples on official GenICamTL support in Halcon application can be found on:
https://www.mvtec.com/products/interfaces/documentation/view/1307-standard-13-mvtecdoc-genicamtl