Frequently Asked Question
How to override camera XML file?
Last Updated 8 years ago
In order to override cameras native XML file,the following steps should be taken:
1. First the “Override" checkbox under "Camera schema definition”, located in the “Camera” tab, should be checked.
2. A valid camera XML file has to be selected, as shown in the image below.
3. Following this, you can initiate a camera scan.
If the “Override" checkbox is not checked, the Frame Grabber will try to retrieve the native XML file from the camera.
1. First the “Override" checkbox under "Camera schema definition”, located in the “Camera” tab, should be checked.
2. A valid camera XML file has to be selected, as shown in the image below.
3. Following this, you can initiate a camera scan.
If the “Override" checkbox is not checked, the Frame Grabber will try to retrieve the native XML file from the camera.